|
|
| |
| Dual Antennas NFC Reader/Writer ER322 |
|
<< Back |
|
| |
 |
|
|
|
| |
|
| Overview: |
The ER322 NFC Writer is a PC-linked contactless smart card reader/writer developed based on the 13.56 MHz Contactless (RFID) Technology. It supports MIFARE®1k, MIFARE®4k, MIFARE Ultralight®, NTAG213, NTAG216 and ISO 14443A compatible cards. This device work same as the ER302 writer, the difference is that it has an external small antenna, use this external antenna the user can read or write continuous tags easily and will not interfere other tags near sides.
ER322 use USB port to act as a virtual COM port. The proximity operating distance of ER322 is up to 10 cm, depending on the type of contactless tag in use.
The ER322 is ideal for secure personal identity verification, access control, e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication.
|
| Special: |
¡€Supported cards: MIFARE®1k, MIFARE®4k, MIFARE Ultralight®, NTAG21x;
¡€RF Frequency: 13.56 MHz;
¡€Typical time of command£º<100ms;
¡€Dual Antennas£»
¡€Operating distance: up to 6cm£»
¡€Two LED indicators(software controlled)£»
¡€Communications Interface: USB£»
¡€Buzzer alarm (software controlled); |
| Smart Card Supported: |
ISO 14443A: NTAG216/215/213, MIFARE Ultralight®,MIFARE® Classic 1k(MF1 ICS50), MIFARE® Classic 4k(MF1 ICS70) |
| IRF speed: |
212 kbps |
| Interface: |
USB |
| Supply Voltage: |
5V DC(USB power) |
| Supply Current: |
42mA(operating);22mA(close port);60mA(maximum) |
| Typical Operating Distance: |
Up to 6cm(depends on the tag type) |
| Operating Temperature: |
-10¡æ ~ + 50¡æ |
| Storage Temperature: |
-20¡æ ~ + 70¡æ |
| Dimensions: |
120mm(L)¡Á80mm(W)¡Á16mm(H) |
| Antenna size: |
46mm(L)¡Á19mm(W)¡Á8mm(H) |
| Weight: |
120g(including USB Cable) |
| System : |
Win7, Win10,Android,Linux |
| Technical Documents Download |
|
|
|
|
